• ADVERTISEMENT

    Public Lab Uses Kickstarter to Bring DIY Spectrometry to the Masses

    by Jeffrey Warren
    September 13, 2012

    Mobile spectrometer

    The Public Lab community has been working on a cheap, open-source spectrometer for detecting environmental contaminants [for some time now](http://publiclaboratory.org/notes/spectrometer). Since the [last spectrometry post](http://mediashift.org/idealab/2011/09/taking-steps-toward-diy-spectrometry-so-citizens-can-test-for-pollutants249.html), one year ago, a lot has happened, so I thought I’d take the opportunity to write an update on the project.

    Most importantly, we’ve just launched [a Kickstarter campaign](http://kck.st/PI9XOq) to actually get spectrometers into people’s hands — lots of them. For as little as $35, you can now get your own kit and start scanning different materials in your backyard, neighborhood, or household. With one of our latest prototypes — a spectrometer that attaches to your smartphone (see above) — we hope to make spectrometry available to anyone, even when you’re outside or away from home. Already the Kickstarter campaign has raised more than $58,000 from 923 backers, so we’re on our way.

    ADVERTISEMENT

    In creating a disruptively inexpensive and accessible instrument — at under $100, while commercial spectrometers are thousands, or tens of thousands of dollars — some of the key challenges involve calibrating data and ensuring that it is good enough quality. Where we left off, we were [testing different ways to calibrate](http://publiclaboratory.org/wiki/video-spectrometer-calibration), standardize and compare spectral readings. Now, having made much progress (though there’s still much to be done!), we’re focusing on a different part of the problem — data collection and experimental setup.

    Testing wort with SpectralWorkbench

    The hardware design of the spectrometer has progressed considerably, and in pushing for so many people to build and use spectrometers, we’re hoping to refocus efforts on building a [shared, open-source spectral library](http://spectralworkbench.org) and developing easy, consistent, and rigorous techniques.

    ADVERTISEMENT

    SCIENCE IS JUST THE BEGINNING

    In a sense, the project has progressed from an engineering problem to a science problem — among the hundreds of Kickstarter backers, [many are asking whether the device can be used](http://www.kickstarter.com/projects/jywarren/public-lab-diy-spectrometry-kit/comments) for myriad applications, from [agricultural testing of sulfur](http://www.kickstarter.com/projects/jywarren/public-lab-diy-spectrometry-kit/posts/298302#comments) to blood or soil tests, to uses in astronomy or gemmology. I think it’s great that people have so many ideas and questions — that’s the whole reason we’re making this kit available, and it’s a big step towards proving out different applications and methodologies.The science is really just beginning! For an overview of some of the suggested uses, see this wiki page on which we’re starting to compile research: http://publiclaboratory.org/wiki/spectral-analysis

    i-5a1d1d5d5a69376001711ab28d68e8b4-workbench.jpg

    The web-based software for using your DIY spectrometer.

    Though the many diverse uses might seem to distract from our original goal of (detecting oil contamination), the open-endedness is intentional. We are, in a sense, gambling that by engaging so many new citizen scientists, the uses such as [measuring grow lamps](http://mediamatic.net/319662/en/led-growing-light-analyses) or [laundry detergent dyes](http://publiclaboratory.org/notes/joshmc/4-28-2012/setup-uv-testing-specrtrometer) will help refine and improve techniques which will benefit all uses, including pollution detection. Having a shared platform and standardized techniques, not to mention a whole community of burgeoning experts in spectral analysis, can’t but help in bringing spectral analysis of pollution closer to reality.

    We’ve made a few models of spectrometer available — including a papercraft version for only $10 — but the “countertop model” which comes in a nice enclosure with a dimmable lamp, is closest to the kind of device we imagine people will eventually put in their kitchen or garage, which restaurants or coffee shops might have to test their products, or citizen scientists might use to quickly assess water or soil samples.

    BRINGING SPECTROSCOPY TO NONSCIENTISTS

    i-90683320080b39e994f2909637592a48-brian.jpg

    Brian measuring out some wort.

    In that spirit, I’ve been visiting different spots around town to explore those kinds of everyday uses. Last week, I met up with Brian from [Mystic Brewery](http://publiclaboratory.org/notes/warren/8-28-2012/spectral-yeast-tests-mystic-brewery), and we tried quantifying yeast in their propagator. A few days later, I visited Gus at [Toscanini’s](http://publiclaboratory.org/notes/warren/8-29-2012/testing-coffee-spectra-toscaninis) in Central Square, Cambridge, Mass., and we scanned a variety of coffee drinks. Though this may sound like the nerdiest of foodie pursuits, I hope that we can inspire folks to learn about spectroscopy, a technique which today is available only to well-funded “experts” in university and industry labs.

    Though our main goal is to make science tools available to non-scientists, there is much to be gained from attracting some scientists to our project as well. First, we’ve already relied on the contributions and advice of a variety of scientists in designing our tools — from Public Lab contributors who work in spectral analysis to close examinations of NASA instruments like the [CRISM spectrometer](http://crism.jhuapl.edu/instrument/innoDesign.php) aboard the Mars Reconnaissance Orbiter.

    i-3b9bdf7b28bee8a8f4aaa64cfce73dc9-coffee.jpg

    Espresso in the countertop spectrometer at Toscanini’s.

    But the very real possibility that traditional scientists would be interested in instruments 1/1000 the price of what they are used to can only help our cause by comparing and contrasting our tool’s data to that of commercial alternatives. If papers are published which cite the use of our tools, credibility will grow, as will bridges between the science world and the wider public — we just have to be sure the tools are good enough.

    Finally, the analysis software at [SpectralWorkbench.org](http://spectralworkbench.org) — a kind of [OpenStreetMap](http://openstreetmap.org) or Wikipedia of spectral data — treats spectral analysis like a “big data” problem. Though we web developers are now accustomed to thinking this way about leveraging huge datasets, the idea of a truly gigantic, shared, open-source spectral database opens up possibilities for analysis and, of course, matching. We’re being a little optimistic when, in our Kickstarter, we talk about building a “SHAZAM for materials”, but we really hope that our growing community of self-taught spectral analysis experts will someday be able to hold up a spectrometer-enabled smartphone, scan a water sample, and confidently identify a dangerous carcinogen.

    i-63a9f735f33c9173e70429d18ed7a25d-spectra.jpg

    A comparison of different spectra at SpectralWorkbench.org.

    The creator of GrassrootsMapping.org, Jeff Warren designs mapping tools, visual programming environments, and flies balloons and kites as a fellow in the Center for Future Civic Media, and as a student at the MIT Media Lab’s Design Ecology group, where he created the vector-mapping framework Cartagen. He co-founded Vestal Design, a graphic/interaction design firm in 2004, and directed the Cut&Paste Labs project, a year-long series of workshops on open source tools and web design in 2006-7 with Lima designer Diego Rotalde. He is a co-founder of Portland-based Paydici.com.

    Spectral Workbench images by [jeferonix](http://www.flickr.com/photos/jeffreywarren/) via Flickr.

    Tagged: diy kickstarter plots pollution public lab shazam for materials spectral analysis spectrometer

    Comments are closed.

  • ADVERTISEMENT
  • ADVERTISEMENT
  • Who We Are

    MediaShift is the premier destination for insight and analysis at the intersection of media and technology. The MediaShift network includes MediaShift, EducationShift, MetricShift and Idea Lab, as well as workshops and weekend hackathons, email newsletters, a weekly podcast and a series of DigitalEd online trainings.

    About MediaShift »
    Contact us »
    Sponsor MediaShift »
    MediaShift Newsletters »

    Follow us on Social Media

    @MediaShiftorg
    @Mediatwit
    @MediaShiftPod
    Facebook.com/MediaShift